Waterers

Super Efficient Electric & Insulated Waterers
These one-piece, heavily insulated waterers are all poly. . . rust and corrosion free. Thick styrofoam floor keeps the frost line below the waterer. Urethane insulation in the walls is over four times the insulation found in competitor's models. Tested to -20° F.

These state-of-the-art waterers feature a low wattage, infra-red heat pad, placed directly under the water trough (starts at approx. 42°F). These pads produce more heat, using less than 1/4 of the electricity of 500 watt heaters (115 Volt). The double insulated design eliminates the possibility of stray voltage that can be a problem in metal waterers. Heat pads are totally isolated from the animal to prevent danger from shock from the heating element. An optional low pressure valve is available for special applications. Units have a new non-siphoning easy maintenance (BL) water valve, built-in hold downs, removable drain plugs and easily accessible doors. Fully assembled, ready to install.

NOTE: Models PCHI, PCSI and PCPI are non-electric and for use in climates above freezing.

The Automatic Stall Waterer (ASW-H) is designed for placement in a stall. A new automatic fill valve assures fresh water at all times. Rounded corners for animal safety. Drinker height can be adjusted from 40" to as low as 18" by cutting the bottom of the pedestal off to the desired height. The ASW-H has a 100 watt super-efficient infrared heat pad.

The Companion/Horse (PCHI and PCHE) waterers are made especially for horses, exotic pets or small farm animals. Features include rounded edges for animal safety, a large access panel for hookup and maintenance, molded in hold downs, thick insulation and a deep 8" bowl which holds 5.5 gallons. The PCHE is electric and uses a 75 watt super efficient infrared heating pad which is thermostatically controlled.

All Electric Waterers have a 5 year limited warranty on the body and a 1 year limited warranty on valves and controls.