Energy-Free Waterers For Cold or Hot Weather
The Super 2 Hole Cattle Waterer
(SF-2C) is designed for heavy cattle use in extremely cold temperatures. It has been tested at -20°F for 48 hours without freezing up with no animals drinking. The rim design keeps float balls free of ice buildup. Extra thick 4" urethane insulation. It has a removable top for hot weather operation. Newer models (Granite color) feature the Apex valve. This new valve has: a fast, consistent fill; instant water cutoff; diaphragm activated valve; valve activates with 1-1/2" water level drop; for pressure lines from 5-150 lbs. No additional pressure regulator required.

Two and four hole Energy-Free Waterers are built to provide a continual supply of fresh water to small or large groups of animals depending on the unit. The float balls keep the units algae free. The heavily insulated walls keep water cool in summer and warm in winter.

An optional low pressure valve is available for special applications.

To ensure proper operation, it is recommended that each unit be installed with the Poly Earth Tube and Shut-off Valve Kit.

The Shut-off Valve Kit (6') contains everything needed to properly plumb any Energy-Free Waterer. The hydrant-valve design drains the water line when the valve is in the off position. NOTE: The Shut-off Valve Kit will not work with water pressure below 20 p.s.i.

The 18" long Poly Earth Tube provides the protection needed to keep the riser pipe from freezing below the ground even in the coldest weather. Units connect together to desired length with two screws. The all poly shell is extremely durable and waterproof. No need to worry about collapsing when backfilling. 12" outside diameter.

Units have non-siphoning water valve, built-in hold downs, removable drain plugs and easily accessible doors. Fully assembled, ready to install.

All Energy-Free Waterers have a 5 year limited warranty on the body and a 1 year limited warranty on valves and controls.

Super Efficient Electric & Insulated Waterers
These one-piece, heavily insulated waterers are all poly. . . rust and corrosion free. Thick styrofoam floor keeps the frost line below the waterer. Urethane insulation in the walls is over four times the insulation found in competitor's models. Tested to -20° F.

These state-of-the-art waterers feature a low wattage, infra-red heat pad, placed directly under the water trough (starts at approx. 42°F). These pads produce more heat, using less than 1/4 of the electricity of 500 watt heaters (115 Volt). The double insulated design eliminates the possibility of stray voltage that can be a problem in metal waterers. Heat pads are totally isolated from the animal to prevent danger from shock from the heating element. An optional low pressure valve is available for special applications. Units have a new non-siphoning easy maintenance (BL) water valve, built-in hold downs, removable drain plugs and easily accessible doors. Fully assembled, ready to install.

NOTE: Models PCHI, PCSI and PCPI are non-electric and for use in climates above freezing.

The Automatic Stall Waterer (ASW-H) is designed for placement in a stall. A new automatic fill valve assures fresh water at all times. Rounded corners for animal safety. Drinker height can be adjusted from 40" to as low as 18" by cutting the bottom of the pedestal off to the desired height. The ASW-H has a 100 watt super-efficient infrared heat pad.

The Companion/Horse (PCHI and PCHE) waterers are made especially for horses, exotic pets or small farm animals. Features include rounded edges for animal safety, a large access panel for hookup and maintenance, molded in hold downs, thick insulation and a deep 8" bowl which holds 5.5 gallons. The PCHE is electric and uses a 75 watt super efficient infrared heating pad which is thermostatically controlled.

All Electric Waterers have a 5 year limited warranty on the body and a 1 year limited warranty on valves and controls.

A Rugged And Durable Waterer For Your Pasture Needs
The 80-Gallon Utility Waterer (ULTY80) is made of tough high density polyethylene that will never rust or corrode. Its light weight makes it easy to handle and all drinker edges are protected with heavy galvanized steel bite guards. Can be heated for winter use. (Optional heaters available)